Anyang ST 25 kg Pneumatic Power Hammer
Price reflects new tariffs as of 04/06/2025.
Shipping fees to be determined then added to total. Carrier truck freight.
You will be invoiced for the purchase of Anyang ST hammers via email.
Anyang ST-25 forging power hammer is a forging device with two cylinders integrated. The compression cylinder is located behind the equipment. It compresses the air and sends it to the working cylinder through the distribution valve. The working cylinder is located in front of the equipment. The hammer rod in the working cylinder drives the hammer head to hammer up and down.
In order to provide customers with high-quality forging power hammer, after years of hard work and trials in several forging factories, our company's technology research and development team has finally developed a ST-25 forging power hammer that is well received by customers. All enquires are welcomed.
Price reflects new tariffs as of 04/06/2025
Key Features
-
Self-Contained System: No external air supply needed—streamlining setup and minimizing maintenance.
-
Precision Foot Pedal: Offers smooth, responsive control for everything from light touches to heavy strikes.
-
25 kg Ram Force: Shapes steel up to 40x40 mm square or 45 mm round with reliable, consistent power.
-
High Strike Rate: Delivers 250 blows per minute to boost productivity while maintaining precision.
- Simple Installation: Integrated lifting eye and forklift slots make setup safe and hassle-free.
-
Easy Maintenance: A few bolts remove access cover for greasing rotating bearings. Oil is used once through the system and is stored in the bottom until drained by an opening of drain valve.
-
Three Phase electric motor: Your hammer comes ready to connect to your three-phase electric service. There is an available (see Anyang Store category) Anyang ST (VFD) variable frequency devise to connect your three-phase motor to a single-phase electric service.
Extra dies available:
- 1# Drawing dies,
- 2# Fullering dies,
- 3# Combination Drawing / flat dies,
- 4# Combination Fullering / flat dies,
- 5# Crown dies,
- 6# Heavy fullering dies,
Main specification
| MODEL | ST-25 |
| RATED WEIGHT OF TUP | 25KG - 55lbs |
| BLOW ENERGY | 0.27KJ |
| NO OF BLOWS PER MIN | 250 |
| WORKING HEIGHT | 240MM |
| DISTANCE FROM HAMMER TO ROD | 235MM |
| MAX SQUARE WORKED (M.S) | 40MM×40MM |
| MAX DIA WORKED (M.S) | Φ48MM |
| MOTOR MODEL | Y132S1-6 |
| MOTOR POWER | 3 kw / 4 hp |
| TOTAL WEIGHT | 1100KG - 2420lbs |
| OVERALL LENGTH | 1280MM - 50.4" |
| OVERALL WIDTH | 720MM - 28.4" |
| OVERALL, HEIGHT | 1835MM - 72.25" |